Wilton 4103 Uživatelský manuál stáhnout pdf (Strana 24)

Disassembly

Disassembly of the dust collection system is re-

quired only to replace the motor or the fan compo-

nents. The motor switch, if failed, can be replaced

without removal of the motor.

1. Remove chip drawer (2) and cover (4) from

base (1).

2. Remove the filter cover (5) and filter (6). Re-

place filter if required.

3. Remove five nuts (10) and lock washers (11)

from studs at rear of base (1).

4. Remove four nuts (12) and lock washers (13)

from screws (14). Remove screws (14) from

inside fan housings. Separate motor support

panel (9) (with fan and motor still attached) from

base (1).

5. Remove five nuts (17), lock washers (18) and

screws (19) that secure the fan housings

together.

6. Using a flat bladed tool, separate the outer fan

housing (16) from the inner fan housing (24).

7. Using an Allen wrench, loosen set screw (22).

Remove fan (21) from shaft of motor (25).

Remove key (23) from motor shaft.

8. Use a flat-bladed screwdriver to hold flat head

screws (28) (in inner fan housing). Remove four

nuts (26) and lock washers (27) from the flat

head screws (28) in motor mounting lugs.

Assembly

Assembly is the reverse of disassembly. Observe the

following during assembly:

1. Assemble motor (25) and inner fan housing (24)

on rear panel; make sure fan duct is facing

downward.

2. Make sure guard strap (20) is installed in the

recesses in fan duct.

3. Mate fan housings (16 and 24). Turn fan (21) by

hand to check for rubbing. Adjust fan as re-

quired.

4. Use a spare screw or a Phillips screwdriver to

align screw holes in outer fan housing (16),

spacer (15), and in the internal panel of base

(1).

5. With the screw holes aligned, install the support

panel (9) on the five studs at the rear of base

(1).

6. Connect electrical power and check operation

of the dust collection system.

1 2 ... 19 20 21 22 23 24 25 26 27 28

Komentáře k této Příručce

Žádné komentáře

Wilton 4103 Uživatelský manuál Strana 24

Komentáře k této Příručce

Související produkty a manuály pro Nástroje Wilton 4103